Versatile Truck Bed Systems
 
VersaRack™ by Masterack®


VERSARACK™: The all anodized aluminum VersaRack™ fits the majority of makes and models of pickup trucks, regardless of bed length.  From mid-size to full-size, two sizes fit all.  For pickup trucks with stake bed pockets, VersaRack™ can mount with Pocket Loks®, thereby avoiding drilling.  VersaRack™ may be used in connection with SecureLid®, for a multitude of industries, and maintains an 800 lbs. load capacity.  Pocket Lok®s sold separately.  All hardware is included.  Shipped via UPS.  Installed in 2 hours.

Pocket Lok® is the registered trademark of J & S Products Inc.
VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 Part #:  Description:

 Unit:

 Install Wt:

 Ship Wt:

 VER12000  VersaRack™ for mid-size (Colorado, Ranger, Dakota, Tacoma, etc.)

 Each

 53 lbs

 55 lbs

 VER12001  VersaRack™ for full-size (Silverado, F-150, Ram, Tundra, etc.)

 Each

 55 lbs

 57 lbs


 

VersaRack™ Cap Rack

VERSARACK™ CAP RACK:  All anodized aluminum VersaRack™ that mounts around a cab-high, flush-sided shell.  Like the standard VersaRack™, the VersaRack™ Cap Rack can be mounted without drilling to pickup trucks that have stake bed pockets, by using Pocket Lok®s.  This rack has a 500 lbs load capacity.  Models available for mid/mini and full size pickup trucks. Pocket Lok®s sold separately.  All hardware is included.  Shipped via UPS.  Installed in 2 hours.

Pocket Lok® is the registered trademark of J&S Products Inc.
VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 

 Part #:  Description:

 Unit:

 Install Wt:

 Ship Wt:

 VER12201  VersaRack™ Cap Rack Mid/Mini Truck

 Each

 63 lbs

 70 lbs

 VER12202  VersaRack™ Cap Rack Full Size Truck

 Each

 66 lbs

 73 lbs

 VER12203  VersaRack™ Cap Rack Ford F-Series & Dodge Ram Truck

 Each

 68 lbs

 75 lbs

Goal Post Rack
 

GOAL POST RACK:  All anodized aluminum ladder rack that mounts SecureShell®.  Like This rack has an 1000 lbs. load capacity, when used with SecureShell®.  Goal Post Rack comes complete with four Ladder Hold Down Cables.  Side rails and short ladder cross channels sold separately.  All hardware is included.  Shipped via UPS.  Installed in 2 hours.

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

GPR10008 Goal Post Rack (SecureShell®)

 Each

 20 lbs.

25 lbs. 

Easy On/Off Ladder Rack

EZ ON/OFF LADDER RACK:  Extruded anodized aluminum ladder rack with stainless steel hardware.  This rack is only for use on full size pickup trucks with SecureLid® Allows easy access to extension ladder.  Solid mount Cross Channel, Ladder Protection Kits, and Ladder Hold Down Cables included.  SecureLid® sold separately.  All hardware included.  Easily installed in 2 hours and 30 minutes.  Shipped via Motor Freight.

 
 Part #:  Description:

 Unit:

 Install Wt:

 Ship Wt:

 ALR10011  Easy On/Off Ladder Rack - Full Size Long

 Each

68 lbs

 68 lbs

 ALR10014  Easy On/Off Ladder Rack - Full Size Short

 Each

68 lbs

 68 lbs

 ALR20021  Easy On/Off Ladder Rack - 1999-2004 Chevy Silverado 8'

 Each

68 lbs

 68 lbs

 ALR20022  Easy On/Off Ladder Rack - 1999-2004 Chevy Silverado 6'

 Each

68 lbs

 68 lbs

Round Suppport Bar Kit
 

ROUND SUPPORT BAR KIT: 1 1/8” Diameter round cross bar.  Anodized aluminum with stainless steel hardware and composite mounting brackets.  Mounting brackets allow easy positioning of Support Bar on VersaRack™.  Bar diameter compatible with Yakima™ Sporting Equipment.  Plastic Protection Cover (LPR10022) sold separately.  Easy installation.  Mounting hardware is included.  Installed in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

YAK10010 Round Support Bar Kit 48" Base

 Each

 4 lbs.

8 lbs. 

Cross Channel
 

CROSS CHANNEL:   Anodized extruded aluminum channel mounts between rack ends to allow shorter items to be carried on VersaRack™, VersaRack™ Cap RackLadder Protection Kits sold separately.  All hardware included.  Installed in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

 LCB10009 Cross Channel (VER12000 & VER12001)

 Each

 3 lbs.

6 lbs. 

 LCB10016 Cap Rack Cross Channel (VER12202)

 Each

 3 lbs.

6 lbs. 

 LCB10017 Cap Rack Cross Channel (VER12201)

 Each

 3 lbs.

6 lbs. 

 LCB10019 Cap Rack Cross Channel (VER12203)

 Each

 3 lbs.

6 lbs. 

Ladder Protection Kits
 

LADDER PROTECTION KITS:  Made from durable Geloy, Ladder Protection Kits protect both ladder and rack from damage due to abrasion.  Protects fiberglass ladders from becoming electrically conductive due to particle absorption.  Applied easily to VersaRack™ square, cross members and round cab protector bar in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

LPR10020 Square Channel Plastic Protection Covers

 Each

 1/2 lb.

1 lbs. 

LPR10021 Half Round Plastic Protection Covers (Standard)

 Each

 1/2 lb.

1 lbs.

LPR10022 Half Round Plastic Protection Covers (Ladder Horn)

 Each

 1/2 lb.

1 lbs.

Ladder Horn
 

LADDER HORN:  Made from anodized aluminum with stainless steel hardware.  Ladder Horn mounts to from of VersaRack™ for easy loading and unloading of ladders.  Plastic Protection Covers (LPR10021) sold separately.  Ladder Horn is easy to install.  All hardware is included.  (Replaces round cab protector bar.)  Installed in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

ALH10001 Aluminum Ladder Horn 48" base

 Each

 7 lbs.

11 lbs. 

Short Ladder System
 

SHORT LADDER SYSTEM: Anodized aluminum ladder rack for ladders up to 6’.  Mounts suspended from VersaRack™, allowing shorter ladder to be secured below, while carrying two longer ladders above.  Comes complete with Ladder Hold Down Cable, Ladder Protection Kits, Third Brake Light and stainless steel mounting hardware.  Short Ladder System requires a Ladder Cross Channel, sold separately.  Easily installed in 1 hour.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

SLS10001 Short Ladder System

 Each

 17 lbs.

20 lbs. 

Flip Ring Cone Holder
 

FLIP RING CONE HOLDER:  This cone holder is uses a stainless steel ring, with anodized aluminum brackets, and stainless steel hardware.  The Flip Ring Cone Holder mounts easily to VersaRack™ leg.  In most cases this cone holder can be mounted at each Gater corner.  It will adjust to fit a variety of safety cone sizes, and holds up to three safety cones.  All hardware is included.  Flip Ring Cone Holder is for use with VersaRack™.  Installed in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

CHA10005 Flip Ring Cone Holder

 Each

 2 lbs.

3 lbs. 

Ladder Hold Down Cable
 

LADDER HOLD DOWN CABLE:  Plastic coated, braided, stainless steel aircraft cable with aluminum eye-caps.  This 20-inch cable easily mounts to VersaRack™ ends, Cross Channel, side rails, and legs.  A padlock is used to secure ladder.  All hardware is included.  Easily installed in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

CBL10020 Ladder Hold Down Cable

 Each

 1 lbs.

2 lbs. 

Removable Rack End Kit
 

REMOVABLE RACK END KIT: Contains two anodized aluminum brackets (replacing the four composite spacers) and four knobs with attached lanyards (replacing four nyloc hex nuts.)  This allows VersaRack™ end to be removed for loading oversized items into the truck bed without removing entire rack.  Easily installed in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

VER15012 Removable Rack End Kit

 Each

 1/2 lbs.

2 lbs. 

Ladder Clamp
 

LADDER CLAMP:  Anodized aluminum Ladder Clamp mounts at rear of ladder rack.  Clamp holds ladder down, prohibiting migration forward and back, and side to side.  All hardware is included.  Easily installed to VersaRack™ in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

ALB10003 Ladder Clamp

 Each

 2 lbs.

5 lbs. 

PVC Tube Container Kit
   

PVC TUBE KIT:  All aluminum mounting and cap that turns PVC pipe into a lockable container.  Tailgater does not provide PVC pipe.  All hardware included.  Mounts easily to VersaRack™ in 25 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

PTC10002 4" PVC Tube Container Kit

 Each

 3 lbs.

5 lbs. 

PTC10003 6" PVC Tube Container Kit

 Each

 5 lbs.

7 lbs.

Pocket Loks®
 

POCKET LOK®:  Extruded aluminum and Lexan® mounting adapters.  Slip into stake bed pockets.  Each Pocket Lok® contains a 5/16” threaded hole that can be used to mount VersaRack™, SecureLid®, and SecureShell® thus avoiding pickup truck bed modifications.  Available for most standard pickup makes and models.  All hardware included, installed in 15 minutes.  Shipped via UPS

VersaRack™ by Masterack® is trademark of Leggett and Platt Incorporated.
LEXAN EXL® is the registered trademark of General Electric Company
Pocket Lok® is the registered trademark of J & S Products Inc.

 
 Part #:  Description:

Unit: 

Installed Wt:

Shipping Wt:

 VER10001  Pocket Lok® for Ford F-Series 1973-1996

 Set of 4

 1 lb.

 2 lbs.

 VER10007  Pocket Lok® for Ford F-Series w/ Plastic Rail caps

 Set of 4

 1 lb.

 2 lbs.

 VER20007  Pocket Lok® for Ford F-Series w/ Plastic Rail caps

 Set of 6

 1.5 lbs.

 2.5 lbs.

 VER10002  Pocket Lok® for Ford Ranger / Mazda

 Set of 4

 1 lb.

 2 lbs.

 VER10008  Pocket Lok® for Chevy Silverado / GMC Sierra

 Set of 4

 1 lb.

 2 lbs.

 VER20008  Pocket Lok® for Chevy Silverado / GMC Sierra

 Set of 6

 1.5 lbs.

 2.5 lbs.

 VER10003  Pocket Lok® for Chevy / GMC ’62 to ’99 CK Series

 Set of 4

 1 lb.

 2 lbs.

 VER10004  Pocket Lok® for Dodge Ram ’94 to 2002

 Set of 4

 1 lb.

 2 lbs.

 VER10006  Pocket Lok™ for Toyota T-100 / Tundra

 Set of 4

 1 lb.

 2 lbs.

 VER10009  Pocket Lok for Dodge Ram 2003+/ Ford Super Duty

 Set of 4

 1 lb.

 2 lbs.

 VER20009  Pocket Lok for Dodge Ram 2003+/ Ford Super Duty

 Set of 6

 1.5 lbs.

 2.5 lbs.

Dual Beacon Bracket
   

DUAL BEACON BRACKET:  Anodized aluminum Dual Beacon Bracket for mounting extended sized safety beacons.  All hardware included.  Safety Beacons sold separately.  Mounts easily to VersaRack™ or Easy On/Off Ladder Rack in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

BKT10005 Dual Beacon Bracket

 Each

 6 lbs.

8 lbs. 

Beacon Bracket (Standard)
   

BEACON BRACKET:  Anodized aluminum Beacon Bracket for mounting standard sized safety beacons.  All hardware included.  Safety Beacons sold separately.  Mounts easily to VersaRack™ or Easy On/Off Ladder Rack in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

BKT10001 Beacon Bracket (Standard)

 Each

 3 lbs.

5 lbs. 

Headache Rack
   

HEADACHE RACK:  Aluminum, fully adjustable Headache Rack with stainless steel hardware was designed to work with SecureLid® providing safety, while allowing clear visibility.  All hardware is included.  Installed in 1 hour.  Shipped via UPS.

 

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

HAR10001 Headache Rack

 Each

 20 lbs.

25 lbs. 

Rear Rack Roller & Dual Rear Rack Rollers






REAR RACK ROLLER:  Allows single ladder to be loaded from rear by rolling into place.  Mounts easily to VersaRack™ or Easy On/Off Ladder Rack in 25 minutes.  All hardware included.  Shipped via UPS.




DUAL REAR RACK ROLLER:  Allows two ladders to be loaded from rear by rolling into place.  Mounts easily to VersaRack or Easy On/Off Ladder Rack in 35 minutes.  All hardware included.  Shipped via UPS. 

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated.

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

RRR10001 Rear Rack Roller

 Each

 7 lbs.

9 lbs. 

RRR10002 Rear Rack Roller

 Each

14 lbs.

18 lbs. 

Universal Tie Downs
 

UNIVERSAL TIE DOWNS:  Anodized aluminum eyelets give additional tie-down capability.  Easily mounts to VersaRack or Tailgater® ladder rack with Twist-Lock Bolt Tracks.  All hardware included.  Installed in 15 minutes.  Shipped via UPS.

VersaRack™ by Masterack® is a trademark of Leggett and Platt Incorporated.

 
 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

VER15008 Universal Tie Downs

Set of Four

 1 lb.

3 lbs. 

Water Jug Bracket (Rack Leg Mount)
   

WATER JUG BRACKET:  All Aluminum, powder coated Water Jug Bracket.  This Water Jug Bracket easily mounts to the leg of VersaRack™ or Easy On/Off Ladder Rack in 15 minutes.  All Hardware and restraining cord included.  Shipped via UPS.

VersaRack™ by Masterack® is trademark of Leggett and Platt Incorporated.

 Part #: Description 

 Unit:

Installed Wt: 

Shipping Wt: 

WJB10003 Water Jug Bracket (Rack Leg Mount)

Each

 5 lbs.

8 lbs. 

Tailgater®, SecureLid®, SecureShell®, SecureLine®, and SecureBox®, are the registered trademark of Tailgater Incorporated.