|
|
|
5/15"-18 x 1" Hex Bolt |
|
(SSH60026) |
|
|
|
Spring Nut |
|
(HDW60015) |
|
|
|
5/16" Flat Washer |
|
(SSH60014) |
Installation Instructions:
Stretch the Spring Nut so that the spinf is long enough to touch the inside bottom of the Bin Support Bar and give the Spring Nut enough tension to hold it in place. Insert the Spring Nut into the Bin Support Bar and twist it into place. Attach the Bin Stop Bracket in the desired location and use the 5/16" Flat Washer and Hex Bolt to mount it in place. Before tightening it completely, place the Parts Bin in place to double check and tighten the rest of the way.