Installation Instructions: Cone Holder (CHA10058, CHA10059)
Installation Instructions: The Cone Holder may be mounted in many locations, including on Lid Assembly, truck bed, inside SecureShell®, or van interior. Note: When mounting the Cone Holder to SecureLid®, first place the Cone Holder with the lip inward on the SecureLid® between the Truck Cab and the SecureLid®, as shown.  Allow space for the Rack Leg and clearance for the lid. Wherever you decide to mount it, position Cone Holder and mark holes through the holder. Remove the Cone Holder and drill the holes with a 9/32” drill bit and power drill.  Deburr both holes and mount the holder to the lid with supplied hardware. To use the Cone Holder, simply place the cone into the holder with the cone base under the lip and drop the cone into place. To remove cones, push forward and pull up.
Cone Holder (1)  (TGF00432)	1/4”-20 x 1” Hex Bolt (2) (SSH60031)	1/4" Flat Washer (4) (SSH60046)	1/4” Nyloc Hex Nut (2) (SSH60035)
Back Lobby - Showroom - Workshop - Office - Conference - Map Copyright © 1999-2005 Tailgater Inc. .