SCC10007 Fixed Spool Spindle
08/2001


Installation Instructions:
The Fixed Spool Spindle can be mounted to 15” drawer or other flat surfaces.
Drawer Mount:
1. Place Fixed Spool Spindle over existing square holes in the drawer bottom.
2. Insert a 1/4” Carriage Bolt into square holes from the underside of the drawer and secure with a Flat Washer and Nyloc Hex Nut on top. (see detail)
3. Repeat at the remaining three holes.
4. Tighten all four Nyloc Hex Nuts.
Installation is now complete.

Parts: Hardware:
Fixed Spool Spindle (1)
1/4”-20 x 3/4” Carriage Bolt (4)
1/4” Flat Washer (4)
1/4-20” Nyloc Hex Nut (4)

Back

Lobby - Showroom - Workshop - Office - Conference - Map

Copyright © 1999-2005 Tailgater Inc.