Installation Instructions:

The Fixed Spool Spindle can be mounted to 15” drawer or other flat surfaces.
 
Drawer Mount:
1.  Place Fixed Spool Spindle over existing square holes in the drawer bottom.
2.  Insert a 1/4” Carriage Bolt into square holes from the underside of the drawer and secure with a Flat Washer and Nyloc Hex Nut on top. (see detail)
3.  Repeat at the remaining three holes.
4.  Tighten all four Nyloc Hex Nuts.

Installation is now complete.

Spindle Holder and Lazy Suzan (1)	Spindle Insert (1)
(TA01302)	(TGC01304)
1/4"-20 x 3/4" Carriage Bolt	1/4" Flat Washer	1/4"-20 Nyloc Hex Nut
(HDW60127)	(SSH60035)	(SSH60046)