1. Remove Cam Lock
2. Mount Mini “T” Handles as shown in diagram.
(Note: Thread up nut to washer very carefully. Do not overtighten! The Nut should just touch the washer.)
3. Replace existing Cam with new Cam (square hole)
4. Attach new Cam and Rods to Threaded Shaft with Jam Nut and Nyloc Nut.
5. Installation is now complete.
| KEY: A. 3/8" Nyloc Hex Nut (Slim) B. New Cam (Square Hole) C. 3/8" Jam Nut D. 3/8" Nyloc Hex Nut (Slim) E. 3/8" Flat Washer F. Sleeve Support G. Lid Assembly H. Mini T Handle I. Sleeve Support J. 3/8" Nyloc Hex Nut (Slim) K. 3/8" Jam Nut L. 3/8" Nyloc Hex Nut (Slim) M. 3/8" Flat Washer N. New Cam (Square Hole) |
| Parts |
|
|
|
Mini "T" Handle w/ Keys (2) |
|
|
|
Anchor Plate (2) |
|
|
|
Sleeve Support (2) |
|
|
|
Flat Washer 3/8" (2) |
|
|
|
Nyloc Hex Nut (4) |
|
|
|
Nyloc Slim Nut (2) |
