MHK10001 - Mini "T" Handles - Pop Up Retro Fit
08/2001


Installation Instructions:
1. Remove existing “Pop-Up” Handles.
2. Mount Adaptor Plates. (see diagram)
3. Mount Mini “T” Handles. (see diagram)
4. Attach Cam and Rods to Threaded Shaft. (see diagram)
5. Installation is now complete.

KEY:
A. Locking Rod with Set Screw
B. 3/8"-24 Nyloc Hex Nut*
C. 3/8" Flat Washer
D. Seal Cup Support
E. #10 Nyloc Hex Nut
F. Anchor Plate
G. Lid Assembly
H. #10 x 3/4" Tamper Proof Screws
I. Mini "T" Handles
J. #10 Flat Washer
K. Seal Rings
L. Round Side Out
M. Seal Cup Support
N. 3/8" Flat Washer
O. 3/8"-24 Nyloc Hex Nut*
* Note: Thread nut up to washer carefully. DO NOT OVERTIGHTEN. The nut should just touch the washer.


Parts:
Mini "T" Handle w/ Keys (2)
Anchor Plate (2)
Sleeve Support (2)
Seal Ring (4)

Hardware:
Tamperproof Screw (4)
Flat Wahser # 10 (4)
Flat Washer 3/8" (2)
Nyloc Hex Nut (4)
Nyloc Slim Nut (2)


Back

Lobby - Showroom - Workshop - Office - Conference - Map

Copyright © 1999-2001 Tailgater Inc.