SCC10006 - Multi Spool Caddy
08/2001
Installation Instructions:
The Multi Spool Caddy makes it easy to transport large cable spools, such as RG-11, to and from your vehicle. The detachable handle and elastic cord make spool transportation easy.
Required Adjustments:
The Multi Spool Caddy is shipped in the largest setting in order to hold spools up to 24” in diameter. If you are using smaller spools,10” to 15” diameter, the Rollers need to be repositioned. To adjust the Rollers, push the spring loaded roller shaft in through the mounting hole on both sides, and slide the Roller toward the center of the assembly and into the hole in the inside position, as shown below. Handle Assembly:
The Multi Spool Caddy is shipped without the Handle attached. Insert the 3/8” rod end into the bottom of the “U” Bracket and fasten with the supplied Pin on top, as shown. When transporting the Multi Spool Caddie in your vehicle, remove the Handle for more convenient storage.
| Parts: | ||
 |
 |
 |
|
Spool Caddy Unit (1) |
Caddy Handle(1) |
Bunji Cord (1) |